TM 9-2320-302-20
0186 00-4
HOOD ASSEMBLY REPAIR - CONTINUED
0186 00
DISASSEMBLY - CONTINUED
9.
Remove four screws (32), washers (33), and bracket (34) from hood (4).
10.
Remove spring (35), lock nut (36), screw (37), cable (38), two lock nuts (39), screws (40), and two cables (41) from
yoke (42). Discard lock nuts.
11.
Remove lock nut (43), screw (44), and cable (38) from bracket (34). Discard lock nut.
12.
Remove lock nut (45), screw (46), spring (35), and spacer (47) from bracket (34). Discard lock nut.
ASSEMBLY
1.
Install spacer (47) and spring (35) on bracket (34) with screw (46) and new lock nut (45).
2.
Feed cable (38) through spring (35) and install on bracket (34) with screw (44) and new lock nut (43).
3.
Install cable (38) and two cables (41) on yoke (42) with screw (37) and new lock nut (36), two screws (40), and new
lock nuts (39). Install spring (35) to yoke.
4.
Install bracket (34) on hood (4) with four washers (33) and screws (32).
5.
Install mount (31) on hood guide (30) on each side of hood (4) with two washers (29) and four screws (28).
6.
Install crosstie plate (27) and bracket (26) on each side of hood (4) with four washers (25) and screws (24).
4
43
45
35
38
42
36
39
41
40
37
41
40
39
47
34
46
44
32
33
