TM 9-2320-302-20
0185 00-3
ENGINE HOOD ASSEMBLY REPLACEMENT - CONTINUED
0185 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
7.
Using four personnel, lift hood (7) approximately 4 in (10.2 cm) and walk toward front of vehicle until hood is clear of
vehicle.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
1.
Using four personnel, install hood (7) to vehicle.
2.
Install two screws (12) and new lock nuts (11) to hinges (13).
WARNING
When installing tilt assist cable, hood must be supported to prevent damage to hood or injury to personnel.
3.
Open and support hood (7) (TM 9-2320-302-10).
4.
Install two tilt assist cables (10) in two chain links (8) and close chain links by tightening two nuts (9).
7
