TM 9-2320-302-20
0175 00-1
FRONT BUMPER REPLACEMENT
0175 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanics (Item 36, WP 0236 00)
Wrench, torque, 50-250 lb-ft (Item 46, WP 0236 00)
Materials/Parts
Nut, lock (P/N 23-10340-125) (2)
Nut, lock (P/N MS51922-49) (12)
Personnel Required
Two
References
TM 9-2320-302-10
Equipment Condition
Collision warning system (CWS) antenna assembly
removed (WP 0111 00)
REMOVAL
1.
Remove two lock nuts (1), washers (2), screws (3), washers (4), and bracket (5) from front bumper (6). Discard lock
nuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
2.
Attach suitable lifting device to front bumper (6) using bumper extensions (7) as attaching points.
3.
Remove nut (8), bolt (9), and hook (10) from each tow bracket (11).
11
3
4
5
6
1
2
9
10
8
6
7