TM 9-2320-302-20
0172 00-1
LEFT STEP REPLACEMENT
0172 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Materials/Parts
Nut, lock (P/N MS51922-11) (2)
References
TM 9-2320-302-10
Equipment Condition
Battery box cover removed (TM 9-2320-302-10)
WARNING
DO NOT allow tools to come in contact with batteries. Electrical shock may occur.
REMOVAL
1.
Remove two lock nuts (1), washers (2), screws (3), washer (4), two clamps (5), and step (6) from front and rear step
brackets (7). Discard lock nuts.
2.
Remove nuts (8), washers (9), screws (10), washers (11), and front step bracket (7).
3.
Repeat step 2 for removal of rear step bracket (7).
INSTALLATION
1.
Install front step bracket (7) with three washers (11), screws (10), washers (9), and nuts (8).
2.
Repeat step 1 for installation of rear step bracket (7).
3.
Install step (6) on front and rear step brackets (7) with two clamps (5), washer (4), two screws (3), washers (2), and new
lock nuts (1).
4.
Install battery box cover (TM 9-2320-302-10).
END OF WORK PACKAGE
6
8,9
10,11
7
1,2
3,4
5
