TM 9-2320-302-20
0169 00-2
PITMAN ARM AND DRAG LINK MAINTENANCE - CONTINUED
0169 00
DRAG LINK INSTALLATION
1.
Install two grease fittings (4) in drag link (3).
NOTE
Castle nuts are tightened to 160-215 lb-ft (217-292 Nm). Castle nuts may be tightened further to allow for
cotter pin insertion. DO NOT exceed 300 lb-ft (407 Nm).
2.
Install drag link (3) on vehicle with one castle nut (2) and one new cotter pin (1).
PITMAN ARM INSTALLATION
1.
Install pitman arm (8) on steering gear (9) with screw (7), washer (6), and new lock nut (5). Tighten lock nut to 150-220
lb-ft (203-298 Nm).
2.
Connect pitman arm (8) to drag link (3) and secure with castle nut (2) and new cotter pin (1).
END OF WORK PACKAGE
2
1
1
2
3
4
4
5
6
7
8
9
