TM 9-2320-302-20
0170 00-2
POWER STEERING RESERVOIR AND HOSE MAINTENANCE - CONTINUED
0170 00
DISASSEMBLY
1.
Remove dipstick (15), wing screw (16), washer (17), gasket (18), and cover assembly (19). Discard gasket.
2.
Remove spring (20), washer (21), and filter element (22) from power steering reservoir (2). Discard filter element.
ASSEMBLY
1.
Install new filter element (22), washer (21), and spring (20).
2.
Install new gasket (18), cover assembly (19), washer (17), wing screw (16), and dipstick (15) in power steering reservoir
(2).
INSTALLATION
1.
Position power steering reservoir (2) and secure with two screws (12), four washers (13), and two new lock nuts (14).
2.
Install three elbow fittings (7), tee (11), adapter fitting (10), quick disconnect fitting (9), protective cap (8), and two
hoses (6).
3.
Install elbow (5) and connect hose (4) using four clamps (3).
4.
Install drain plug (1) in power steering reservoir (2).
5.
Fill power steering reservoir (2) with lubricating oil in accordance with Unit PMCS (WP 0021 00). Check system for
leaks and operation.
2
22
21
17
16
15
19
18
20
