TM 9-2320-302-20
0168 00-1
UNIVERSAL SHAFT REPLACEMENT AND REPAIR
0168 00
THIS WORK PACKAGE COVERS
Removal, Disassembly, Assembly, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Drill, electric, portable (Item 11, WP 0236 00)
Drill set, twist (Item 12, WP 0236 00)
Riveter, blind, hand (Item 28, WP 0236 00)
Materials/Parts
Nut, lock, (P/N 115307A)
Nut, lock (P/N 2C447622)
Kit (P/N 5-170X) (2)
Rivet, blind (P/N 1641-0631) (10)
REMOVAL
1.
Remove lock nut (1) and screw (2) from upper shaft (3). Discard lock nut.
2.
Disconnect upper shaft (3) from steering column (4).
3.
Support lower shaft (5) and remove grease fitting (6) from upper shaft (3).
4.
Remove bushing (7) from boot (8).
5.
Separate upper shaft (3) from lower shaft (5) and remove upper shaft from boot (8).
6.
Remove lock nut (9), screw (10), and lower shaft (5) from steering gear (11). Discard lock nut.
7.
If damaged, remove ten rivets (12) and boot (8) from firewall (13). Discard rivets.
4
1
7
2
13
12
11
10
9
5
8
6
3
