TM 9-2320-302-20
0137 00-3
REAR BRAKESHOE REPLACEMENT - CONTINUED
0137 00
INSTALLATION - CONTINUED
3.
Install upper brakeshoe (1) on upper anchor pin (10).
4.
Install two retaining springs (9).
5.
Install lower brakeshoe (4) on lower anchor pin (10).
6.
Rotate lower brakeshoe (4) toward s-cam (8).
7.
Install return spring (7) between upper and lower brakeshoes (1 and 4).
8.
Pull upper and lower brakeshoes (1 and 4) away from s-cam (8).
9.
Install two cam rollers (3 and 6) and two roller retaining clips (2 and 5).
NOTE
Press ears of roller retaining clips together so that retainer fits between brakeshoe webs.
10.
Press each roller retaining clip (2 and 5) between brakeshoe webs (11) until ears of roller retaining clips lock in holes
(12) of brakeshoe webs.
11.
Install rear hub, drum, wheel bearings, and seal (WP 0166 00).
END OF WORK PACKAGE
1
3
6
10
9
10
4
8
1
2
6
12
7
12
11
3
PRESS
5
4
8
