TM 9-2320-302-20
0136 00-1
FRONT BRAKE SPIDER AND BRAKE CHAMBER BRACKET REPLACEMENT
0136 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench, torque, 50-250 lb-ft (Item 50, WP 0236 00)
Materials/Parts
Nut, lock (P/N MS51922-49) (7)
Seal (P/N A-1205-D-2110) (2)
Washer, lock (P/N 1229-R-512) (4)
Grease, GAA (Item 15, WP 0235 00)
Materials/Part - Continued
Oil, lubricating (Item 19, WP 0235 00)
References
WP 0021 00
Equipment Condition
Front brakeshoes removed (WP 0135 00)
Front air brake chamber removed (WP 0141 00)
Front ABS sensor removed (WP 0106 00)
Front slack adjuster and s-cam removed (WP 0140 00)
REMOVAL
1.
Remove two nuts (1), lock washers (2), and screws (3) from brake spider (4). Discard lock washers.
2.
Remove two nuts (5) and lock washers (6) from brake spider (4). Discard lock washers.
3.
Remove two screws (7) and 2-piece dust shield (8) from brake spider (4).
4.
Remove two nuts (9), screws (10), and clamps (11) from brake spider (4).
NOTE
Note position of brake chamber bracket to aid in installation.
5.
Remove two nuts (12), lock washers (13), screws (14), and brake chamber bracket (15) from brake spider (4). Discard
lock washers.
6.
Remove two seals (16) and bushings (17) from brake chamber bracket (15). Discard seals.
7.
Remove seven lock nuts (18), washers (19), screws (20), and brake spider (4) from axle flange (21). Discard lock nuts.
3
14
4
16
17
15
13
17
16
12
2
1
21
19
18
5
6
7
8
9
10,11
20
