TM 9-2320-302-20
0122 00-2
TRANSMISSION OIL COOLER LINES AND FITTINGS REPLACEMENT - CONTINUED
0122 00
REMOVAL - CONTINUED
4.
Remove temperature sensor (10) from elbow fitting (11).
5.
Disconnect transmission oil cooler lines (6 and 7) from elbow fitting (11) and fitting (12).
6.
Loosen jamnuts (13 and 14) of elbow fitting (11) and fitting (12) and remove from transmission (15).
7.
Remove two preformed packings (16). Discard preformed packings.
NOTE
Perform steps 8 thru 12 at transmission oil cooler.
8.
Disconnect transmission oil sample line (17) from elbow (18).
9.
Remove elbow (18) from elbow (19).
10.
Disconnect transmission oil cooler lines (6 and 7) from elbows (19 and 20).
NOTE
Remove tiedown straps as necessary and discard.
11.
Remove transmission oil cooler lines (6 and 7) from vehicle.
12.
Loosen jamnuts (21 and 22) of elbow fittings (19 and 20) and remove from transmission oil cooler (23).
13.
Remove two preformed packings (24). Discard preformed packings.
INSTALLATION
NOTE
•
Lightly lubricate new preformed packings with lubricating oil before installing packings.
•
Perform steps 1 through 6 at transmission oil cooler.
1.
Install two new preformed packings (24) to elbow fittings (19 and 20).
16
13
1110
8
9
15
16
12
14
4
6
7
1,2,3
5
19,24
17
18
21
22
20,24
23
