TM 9-2320-302-20
0121 00-2
TRANSMISSION OIL FILL/LEVEL CHECK TUBE REPLACEMENT - CONTINUED
0121 00
INSTALLATION
NOTE
Perform step 1 if transmission bracket was removed.
1.
Install transmission bracket (8) on transmission (3) with two washers (10) and screws (9). Tighten screws to 54-65 lb-ft
(73-88 Nm).
2.
Position clamp (2) on transmission oil fill/level check tube (7) and install transmission oil fill/level check tube on trans-
mission (3) and transmission bracket (8) with U-bolt (6), two new lock washers (5), and nuts (4).
3.
Install clamp (2) on right side of transmission (3) with screw (1).
4.
Install transmission dipstick (TM 9-2320-302-10).
END OF WORK PACKAGE
4,5,6,9,10
8
7
3
2
1
