TM 9-2320-302-20
0102 00-1
TURBO BOOST SENSOR (TBS) REPLACEMENT
0102 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench, torque, 0-200 lb-in (Item 43, WP 0236 00)
Materials/Parts
Seal (P/N 5182977)
References
TM 9-2320-302-10
REMOVAL
1.
Disconnect engine wiring harness connector (1) from turbo boost sensor (2).
2.
Remove two capscrews (3), turbo boost sensor (2), and seal (4) from intake manifold (5).
INSTALLATION
1.
Install new seal (4) and turbo boost sensor (2) on intake manifold (5) with two capscrews (3). Torque capscrews to 21-
26 lb-in (2.4-3.0 Nm).
2.
Connect engine wiring harness connector (1) to turbo boost sensor (2).
END OF WORK PACKAGE
5
3
2,4
1
