TM 9-2320-302-20
0103 00-1
TIMING REFERENCE SENSOR REPLACEMENT
0103 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench, torque, 15-75 lb-ft (Item 45, WP 0236 00)
References
TM 9-2320-302-10
REMOVAL
1.
Disconnect engine wiring harness connector (1) from timing reference sensor (2).
2.
Remove capscrew (3) and timing reference sensor (2) from gear housing assembly (4).
INSTALLATION
1.
Install timing reference sensor (2) in gear housing assembly (4) with capscrew (3). Tighten capscrew to 22-28 lb-ft (30-
38 Nm).
2.
Connect engine wiring harness connector (1) to timing reference sensor (2).
END OF WORK PACKAGE
1
2
3
4
