TM 9-2320-302-20
0075 00-1
ELECTRONIC CONTROL MODULE REPLACEMENT
0075 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Materials/Parts
Tags, marker (Item 31, WP 0235 00)
References
TM 9-2320-302-10
NOTE
Tag all connectors to aid in installation.
REMOVAL
1.
Remove three connectors (1 and 2) from electronic control module (3).
2.
Loosen two screws (4) and remove two connectors (5) from electronic control module (3).
3.
Remove four bolts (6), electronic control module (3), four isolators (7), and spacers (8) from engine.
4.
Remove four isolators (7) from bolts (6).
INSTALLATION
1.
Install four isolators (7) on bolts (6).
2.
Install four spacers (8), isolators (7), and electronic control module (3) on engine with four bolts (6).
3.
Install two connectors (5) on electronic control module (3) and tighten two screws (4).
4.
Install three connectors (1 and 2) on electronic control module (3).
END OF WORK PACKAGE
6,7,8
4
5
2
1
3
