TM 9-2320-302-20
0076 00-2
NATO SLAVE RECEPTACLE REPLACEMENT - CONTINUED
0076 00
REMOVAL - CONTINUED
NOTE
Perform steps 3 and 4 only if angle bracket is damaged.
3.
Remove batteries (WP 0113 00).
4.
Remove three lock nuts (10), washers (11), screws (12), and angle bracket (9) from battery box (13). Discard lock nuts.
INSTALLATION
NOTE
Perform steps 1 and 2 only if angle bracket was removed.
1.
Install angle bracket (9) on battery box (13) with three screws (12), washers (11), and new lock nuts (10).
2.
Install batteries (WP 0113 00).
3.
Install NATO slave receptacle (4) and cap (8) on angle bracket (9) with four screws (7), washers (6), and new lock nuts
(5).
4.
Install two cables (3) on NATO slave receptacle (4) with two lock washers (2) and screws (1).
END OF WORK PACKAGE
12
13
3
2
1
4
7
8
7
11
10
3
1
2
6
5
9
