TM 9-2320-302-20
0073 00-1
TURN SIGNAL SWITCH REPLACEMENT
0073 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
References
TM 9-2320-302-10
Equipment Condition
Check engine switch removed (WP 0070 00)
REMOVAL
1.
Remove five screws (1), washers (2) and cover (3).
2.
Pull rubber cover (4) downward and remove screw (5) and clip (6).
3.
Remove cable (7) from turn signal switch (8).
4.
Remove clamp (9), turn signal switch (8), and trailer brake valve (10) from steering column (11). Set trailer brake valve
aside.
INSTALLATION
1.
Install trailer brake valve (10) and turn signal switch (8) on steering column (11) with clamp (9). Tighten clamp.
2.
Install cable (7) on turn signal switch (8).
3.
Install clip (6) and screw (5). Push rubber cover (4) upward.
4.
Install cover (3) with five washers (2) and screws (1).
5.
Install check engine switch (WP 0070 00).
END OF WORK PACKAGE
3
1,2
8
9
10
11
4
7
5,6
