TM 9-2320-302-20
0071 00-3
FUSE, RELAY, CIRCUIT BREAKER, AND HOLDER REPLACEMENT - CONTINUED
0071 00
HOLDER REMOVAL - CONTINUED
HOLDER INSTALLATION
1.
Install connectors (11) on holder (4).
2.
Install holder (4) on cab with four screws (10).
CIRCUIT BREAKER INSTALLATION
Install circuit breakers (6) on holder (4).
RELAY INSTALLATION
Install relays (5) on holder (4).
FUSE INSTALLATION
WARNING
When replacing fuses, ensure that replacement fuses are correct amperage. Fuses with incorrect amperage
could result in injury to personnel or damage to equipment.
NOTE
•
To install fuses in cab, perform steps 1 and 2.
•
To install battery box fuse, perform steps 3 and 4.
1.
Install fuses (3) on holder (4).
2.
Position cover (2) in cab and rotate three turnlock fasteners (1).
11
4
8
9
3
10
1
2
