TM 9-2320-302-20
0069 00-2
FIBER OPTIC LIGHT SOURCE REPLACEMENT - CONTINUED
0069 00
INSTALLATION
CAUTION
Do not crimp fiber optic lines. Crimping could cause lines to break internally, resulting in instrument light
failure.
1.
Position four fiber optic lines (7) on rear of fiber optic light source (3) and engage two latches (6).
2.
Install new tiedown strap (5).
3.
Install light socket (4) on fiber optic light source (3) and turn light socket to right.
4.
Install fiber optic light source (3) with torx screw (2) and nut (1).
5.
Install center gage panel (WP 0061 00).
END OF WORK PACKAGE
7
1,2
6
4
5
3
