TM 9-2320-302-20
0069 00-1
FIBER OPTIC LIGHT SOURCE REPLACEMENT
0069 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench set, socket attachment (Item 49, WP 0236 00)
Materials/Parts
Straps, tiedown (Item 30, WP 0235 00)
References
TM 9-2320-302-10
Equipment Condition
Center gage panel removed (WP 0061 00)
REMOVAL
1.
Remove nut (1), torx screw (2), and fiber optic light source (3).
2.
Turn light socket (4) to left and remove from fiber optic light source (3).
3.
Remove tiedown strap (5) and discard.
CAUTION
Do not crimp fiber optic lines. Crimping could cause lines to break internally, resulting in instrument light
failure.
4.
Release two latches (6) on rear of fiber optic light source (3) and remove four fiber optic lines (7).
7
1,2
6
4
5
3
