TM 9-2320-302-20
0052 00-2
WATER PUMP MAINTENANCE - CONTINUED
0052 00
WATER PUMP REMOVAL - CONTINUED
4.
Remove two elbows (9), adapter (10), and two bushings (11) from water pump (3).
5.
Remove drain valve (12) from water pump (3).
6.
Remove two long bolts (13) and short bolt (14) from water pump (3) and gear case (15).
7.
Pull water pump (3) straight out of gear case (15).
8.
Remove gasket (16). Discard gasket.
WATER PUMP SEAL REMOVAL
WARNING
Size and tension of snap ring could cause injury to personnel if snap ring slips off snap ring pliers. Wear face
shield when removing water pump cover snap ring.
1.
Remove water pump cover snap ring (17) from water pump (3).
2.
Remove water pump cover (18) and seal (19) from water pump (3). Discard seal.
WATER PUMP SEAL INSTALLATION
1.
Support impeller side of water pump (3) on workbench and install new seal (19) in bore of water pump (3).
2.
Install water pump cover (18) on water pump (3).
14
4
5
4
13
16
15
2
1
13
17
18
19
9
9
6
6
8
7
3
12
11
10
