TM 9-2320-302-20
0039 00-2
EXHAUST SYSTEM MUFFLER, STACK, AND HEAT SHIELD REPLACEMENT - CONTINUED
0039 00
EXHAUST STACK REMOVAL
Remove four nuts (5), washers (6), two saddle clamps (7), and exhaust stack (8) from muffler (9).
MUFFLER REMOVAL
NOTE
Assistance is required to hold muffler steady while removing hardware.
1.
Remove four nuts (10), washers (11), two saddle clamps (12), muffler (9), and seal clamp (13) from exhaust pipe. Dis-
card seal clamp.
2.
Remove two nuts (14), bolts (15), and retaining clamps (4) from muffler (9).
MUFFLER MOUNTING BRACKETS REMOVAL
1.
Remove four lock nuts (16), eight washers (17), four screws (18), and two muffler mounting brackets (19 and 20) from
vehicle. Discard lock nuts.
2.
Remove four bushings (21) from two muffler mounting brackets (19 and 20). Discard bushings.
8
4
4
3
3
1
1
2
2
13
14
14
9
12
16
17
21
17
19
20
10
11
15
15
16
17
7
21
17
19
18
5
6
6
7
12
