TM 9-2320-273-20
TRANSMISSION.
6-14. TRANSMISSION CONTROL HEATER MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
12. Four cable ties (18).
Cut and remove.
Discard.
13. Screw (39).
Unscrew from sending unit
Near starter. Wire is contained
(40) and remove one wire.
in harness (17). Tag for assem-
bly.
14. Two nuts (38), washers
Unscrew and remove four
At ether quick-start bracket.
(37), nuts (37), and
wires from switch (34).
Four wires are contained in
washers (35).
harness (17). Tag for assembly.
15. Two bolts (30), washers
Unscrew and remove switch
(31) and nuts (32).
(34) from bracket (33).
16. Two bolts (29), washers
Unscrew and remove bracket
(28), and nuts (27).
(33).
17, Nut (45) and washer (44).
Unscrew and remove one wire.
At fuel pump. Wire is contain-
ed in harness (17). Tag for
assembly.
18. Two screws (41).
Unscrew and remove two
Near power steering pump.
wires from sending unit (42).
Wires are contained in harness
(17). Tag for assembly.
19. Sending unit (42).
Unscrew from elbow (43).
20. Elbow (43).
Unscrew from engine block.
21. Nut (46), and washer (47).
Unscrew and remove one wire.
On positive post of alternator.
Wire is contained in harness
(17) which is now completely
removed from vehicle. Tag for
assembly.
6-42