TM 9-2320-273-20
TRANSMISSION.
6-9. OIL SERVICE (Continued).
LOCATION/ITEM
ACTION
REMARKS
C.
REMOVAL OF CASE BREATHER.
7. Floor mat.
Pull back at seam to expose
access plate (2).
8. Eleven screw (1).
Remove.
9. Access plate (2).
Remove from cab floor.
10. One case breather
Unscrew, remove and throw
(3).
away.
10.1.lf required,
Unscrew, remove and throw
change vents (14).
away.
D. INSTALLATION OF NEW CASE BREATHER.
11. One new case breather
Apply Ioctite on threads,
(3).
screw in and tighten care-
fully with pliers. Do not
clamp too tightly, othewise
the plastic cap may crack.
11.1. Eleven new breather
Apply Ioctite on threads,
vents (14).
screw in and tighten care-
fully with pliers. Do not
clamp too tightly, otherwise
the plastic cap may crack.
12. Access plate (2) and
Position and secure with
control cable grommet
twelve screws (1).
and plate.
13. Floor mat.
Reinstall over cover plate.
E. REPLENISHING OIL SUPPLY.
14. Dipstick tube (5).
a. Insert tip of funnel.
b. Pour in 5.5 gal (20.8 liters)
transmission oil.
c. Put dipstick (4) in place.
6-14 Change 1