TM 9-2320-273-20
TRANSMISSION.
6-9. OIL SERVICE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. CLEANING OR REPLACEMENT OF PUMP SCREEN.
3. Eight capscrews (11) and
Unscrew and remove.
washers ( 10).
4. Access cover (9) and
a. Remove.
On the M916 thru M920 the left
gasket (8).
b. Discard gasket (8).
side access cover is blocked by the
PTO, so you will have to use the
right side cover.
CAUTION
Exercise care that when the pump
screen is replaced, that it is properly
latched. If not the screen will fall
into the housing and may damage
internal transmission parts.
5. Pump screen (12).
a.
b.
c.
d.
Slide off of suction tube (13)
by grasping metal spring tab
and pushing down slightly
while pulling out.
Inspect magnets.
If there are large metal
particles, notify Direct Support
Maintenance.
Clean with dry cleaning
solvent.
Dry with compressed air.
Change 2 6-12.1/6-12.2 (blank)
