TM 9-2320-273-20
EXTERIOR LIGHTING.
5-48. BLACKOUT HEADLAMP MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
3. Gasket (9).
Remove.
Discard if cracking or tears are
evident.
4. Bulb (13).
Remove.
5. Nut (6) and washer (5).
Remove from terminal (4).
6. Wire (3).
Remove from terminal (4).
7. Nut (7) and washer (8).
Remove.
8. Blackout headlamp
Remove.
assembly (12).
NOTE
To gain access to terminal block (4) refer
to para. 5-44.
9. Blackout headlamp
Aline mounting stud and
assembly (12).
install.
10. Washer (8) and nut (7).
Install and tighten.
11. Wire (3).
Connect to terminal (4).
12. Washer (5) and nut (6).
Install and tighten.
13. Bulb (13).
Install and twist to tighten.
14. Gasket (9).
Install.
15. Lens cover (11).
Aline and install.
16. Three retaining
Tighten.
screws (10).
17. Headlamp.
Install per paragraph 5-45.
18. OPERATION switch (2).
Set to BLACKOUT.
19. LAMPswitch (1).
Pull ON. Verify that black-
out headlamp comes ON.
5-162
