TM 9-2320-273-20
EXTERIOR LIGHTING.
5-49. BLACKOUT MARKER LAMPS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
1. Two screws (13).
Remove.
2. Lens cover (12).
Remove.
3. Gasket (11).
Remove.
Discard if cracking or tears are
evident.
4. Bulb (14).
Remove.
5. Wire connector (3).
Remove.
6. Nut (9) and washer (8).
Remove.
7. Blackout marker lamp (10). Remove.
8. Nut (7) and washer (6).
Remove from terminal (5).
9. Wire (4).
Remove from terminal (5).
B. INSTALLATION.
10. Wire (4).
Install on terminal (5).
11. Washer (6) and nut (7).
Install and tighten.
12. Blackout marker lamp (10). Aline mounting stud and
install.
13. Washer (8) and nut (9).
Install and tighten.
14. Wire connector (3).
Install in blackout marker
(10).
15. Bulb (14).
Install and twist to tighten.
16. Gasket (11).
Install.
17. Lens cover (12).
Aline and install.
18. Two screws (13).
Install and tighten.
19. Headlamp.
Install per paragraph 5-44.
C. OPERATIONAL CHECK.
20. OPERATION switch (2).
Set to BLACKOUT.
5-166