TM 9-2320-273-20
EXTERIOR LIGHTING.
5-45. FRONT TURN AND MARKER LAMPS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
5. Two screws (4).
Remove.
6. Lens (3).
Remove.
7. Bulb (5).
Remove.
8. Two nuts (7), washers
Remove.
(6) and wire clamp (13).
9. Wire connector (8).
Remove from front turn
and marker lamp (9).
10. Front turn and marker
Remove.
lamp (9).
11. Front turn and marker
Aline in mounting holes.
lamp (9).
12. Two washers (6), nuts
Install and tighten.
(7) and wire clamp (13).
13. Wire connector (8).
Connect to front turn and
marker lamp (9).
14. Bulb (5).
Insert and turn to tighten.
15. Lens (3).
Replace and aline.
16. Two screws (4).
Install and tighten.
17. Bulb (14).
Insert and turn to tighten.
18. Gasket (10).
Replace and aline.
19. Lens(11).
Replace and aline.
20. Four screws ( 12).
Install and tighten.
21. OPERATION switch (2).
Set to NORMAL.
22. LAMP switch (1).
Pull out to first notch and
verify that marker lamps (9)
come ON.
5-148