TM 9-2320-273-20
ETHER QUICK-START SYSTEM
4-32. ATOMIZER MAINTENANCE.
THIS TASK COVERS: (APPROXIMATE TIME REQUIRED FOLLOWS TASK DESCRIPTION.)
a. Removal.
(2)
b. Installation and Operational Check.
(3)
5 Minutes Total.
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE CONFIGURATIONS
PARAGRAPH
CONDITION DESCRIPTION
All.
None.
None.
TEST EQUIPMENT
None.
SPECIAL TOOLS
None.
MATERIALS/PARTS (P/N)
Atomizer, 91302406 (06991)
PERSONNEL REQUIRED
Two (MOS-63B20).
(2nd Mechanic Operates Cab
Controls in Part B.)
REFERENCES (TM)
None.
TROUBLESHOOTING REFERENCES
Table 5-3.
SPECIAL ENVIRONMENTAL CONDITIONS
Coolant Temperature Must Be Below 50°F or Ether
Solenoid Valve Will Not Function.
Work in a Well Ventilated Area Away from Sparks or Flame.
Vehicle Parked on Level Ground.
GENERAL SAFETY INSTRUCTIONS
Ether is Highly Explosive.
Be Alert for the Strong Odor of Spilled Ether.
Guard Against Flame or Sparks in Work Area.
Engine OFF: Transmission in Neutral.
Park Brake Set.
4-108