TM 9-2320-273-20
FUEL AND AIR INTAKE SYSTEM.
4-20. LINES, HOSES, AND FITTINGS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
NOTE
The illustration below identifies all
exterior lines and hoses of the fuel sys-
tem. No special instructions or tools
are needed if you follow standard shop
practice techniques. During installation,
observe the following:
1.
2.
3.
4.
Line-to-block fittings.
Coat pipes with liquid teflon
before insertion.
Line-to-line fittings.
Screw together.
Air line.
Check for leakage with soap
solution.
Hose-to-line fittings.
Clamp securely.
After installation, start up engine (see
TM9-2320-273-10) and check for leaks.
4-55
