TM 9-2320-273-20
BODY AND CAB.
11-20. DRIVERS SEAT MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. CLEANING AND LUBRICATING HARDWARE.
CAUTION
Do not allow dry cleaning solvents to
come in contact with non-metal mate-
rials, These cleaners may damage
leather, rubber, and synthetics.
4.
5.
6.
Slide rails (14)
metal parts.
Grease fittings
and other
(2).
Two torsion bar ends (4),
three adjusting mechanisms
(3), (13), and (15), and
slide rails (14).
C. INSTALLATION.
7.
8.
9.
10.
Adjusting mechanisms (3),
(13), and (15).
Seat (1).
Four washers (11), bolts (12),
and nuts (6).
Seat belt assembly (7).
Clean with SD-2 dry cleaning
solvent.
Lubricate, using grease gun.
Lubricate liberally with
Lubriplate.
Move to center positions.
Set in place and aline mounting
holes.
Screw on and tighten to secure
seat (1) to seat base (5).
a.
b.
Aline mounting holes.
Install with two bolts (10),
Iockwashers (9), and nuts (8).
See LO 9-2320-273-12.
11-64
