TM 9-2320-273-20
BODY AND CAB.
11-21. PASSENGER’S SEAT MAINTENANCE (Continued).
LOCATION/lTEM
A C T I ON
REMARKS
A. REMOVAL
1. Tool box door (5).
Open for access to nuts (3)
Remove tools if necessary.
and washers (4).
2. Four nuts (3) and washers (4).
Unscrew and remove.
3. Seat (1).
Lift out and remove.
B. CLEANING AND LUBRICATING ADJUSTING MECHANISM.
4. Adjusting rack and tooth
a. Clean with soap and water.
mechanism (2).
Dry thoroughly.
b. Apply Lubriplate to both
sides.
C. INSTALLATION
5. Seat (1).
a. Place back in position.
b. Set in place with studs (6)
in holes.
6. Four washers (4) and nuts (3).
Screw on and tighten.
7. Tool box door (5).
C l o s e .
Put tools back in if you took
11-67
