TM 9-2320-273-20
BODY AND CAP.
11-19. MUD FLAPS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
NOTE
Procedure is same for removal of either flap.
A. REMOVAL
1. Spring pin (11) (M915) or
Remove from spring bracket (2).
cotter pin (7) (M916, and
M920).
2. Spring bracket (2).
Lift out of mounting bracket (8).
3. Mud flap (5).
Remove from spring bracket (2)
by removing four bolts (3), washers
(4) and four nuts (6).
4. Two bolts (9) and washers
Unscrew and remove mounting
(10).
bracket (8).
5. Two bolts (12) and nuts (1).
Unscrew and remove stowage
bracket (13).
M915 only.
B. INSTALLATION.
6. Stowage bracket (13).
Attach to RH frame rail with two
M915 only.
bolts (12) and nuts (1).
7. Mounting bracket (8).
Attach to rear frame with two
washers (10) and bolts (9).
8. Mud flap (5)
Install mud flap onto spring bracket
(2) and secure with four bolts (3),
washers (4) and four nuts (6).
9. Spring bracket (2).
Insert into mounting bracket (8) and
install spring pin (11) (M915) or
cotter pin (7) (M916 and M920).
11-61
