TM 9-2320-273-20
BODY AND CAB.
11-18. GRILLE SUPPORT BRACKETS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4. Six capscrews (3), lock-
washers (2) and washers (1).
5. Five rivets (7), retainer (6),
and shield (5).
6. Bracket (11).
Unscrew and remove bracket (4).
Drill out rivets (7) to remove
shield (5) and retainer (6).
Repeat steps (2), (3), (4), and (5)
on opposite side and remove
bracket (11).
B. INSTALLATION.
7.
8.
9.
10.
11.
12.
Bracket (4), shield (5),
retainer (6), and five new
rivets (7).
Six capscrews (3), washers
(1) and Iockwasher (2).
Bracket (8), bolt (16),
bracket (11), six capscrews
(3), washer (1), and
Iockwasher (2).
Three new rivets (9), baffle
(13) and seal (14).
Brackets (4) and (5).
Thirty-seven new rivets
Install onto bracket (4) with new
rivets (7).
Install bracket (4) to radiator
support.
Install.
Install and secure with rivets (9).
Repeat steps (7), (8), (9) and (10)
for opposite side.
Install rivets to secure seal (10).
(9) and seal (10).
Follow on Maintenance Action required:
a. Install grille; refer to para 11-16D.
b. Install brush guard (M916 thru M920);
refer to para 11-16F.
c. Install hood; refer to para 11-29B.
11-58
