TM 9-2320-273-20
STEERING AND ALINEMENT.
10-23. AUXILIARY CYLINDER (M916 THRU M920) (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. INSTALLATION (Continued).
36. New cotter pin (18).
Install through cylinder
end and bend over tabs.
37. Two fittings (14).
Apply liquid teflon to threads;
insert in cylinder and tighten;
advance so that line end faces up.
38. Line (6).
Install to one elbow (14) and
tighten in position shown.
39. Line (13).
Install to one elbow (14) and
tighten in position shown.
NOTE
If lines (6) and (13) were removed from vehicle,
install to bottom of steering gear in positions
shown.
10-101
