TM 9-2320-273-20
STEERING AND ALINEMENT.
10-22. HYDRAULIC POWER STEERING PUMP AND COOLER MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. INSTALLATION (Continued).
24. Engine retarder switch
Attach to fuel pump with two
(4).
capscrews (6) and washers (5).
25. Oil line (7).
Attach with capscrew (10),
washer (9), and hose strap
(8); tighten capscrew to
18 Ib-ft (24 N·m).
26. Hose retainer (19).
Install over hoses (12) and
(14) to front metal with bolt
(15), Iockwasher (16), and
flatwasher (17).
D. FILLING AND BLEEDING SYSTEM.
27. Fill cap (2).
a. Remove.
b. Add fluid if needed.
Fluid should be checked
when warm with engine
off.
Be prepared to add fluid to the system as
soon as pump begins operating.
28. Engine.
Start up (see TM 9-2320-273-10).
29. Filler cap (2).
a. Watch fluid level. If it
drops, add more fluid
immediately. Continue
until fluid stabilizes.
b. Replace cap.
c. Check for oil leaks.
E. STEERING OPERATIONAL CHECK.
30. Steering wheel.
Turn in both directions.
Wheel should turn easily
with no jogging,
31. Engine.
Shut down (see TM 9-2320-273-10).
10-92