TM 9-2320-273-20
STEERING MECHANISM.
Remove.
10-21.1. STEERING ARM MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. DISASSEMBLY (Continued)
5. Cotter pin (13), castle nut (14), and
Discard cotter pin and
steering arm (11).
castle nut.
NOTE
If push rod driver (15) does not align with steering arm (11), perform step (6) first,
to permit more steering travel and alignment of tool.
6. Push rod driver (15), steering arm (11),
Thread pushrod
Drive steering arm out of
and knuckle housing (16).
driver (15) squarely
knuckle housing.
onto end of steering
arm.
7. Key (17)
Remove.
Discard.
8. Steering arm (11).
Remove.
Destroy. (Not for reuse)
9. Jam nut (18) and stop bolt (19).
Loosen nut and
Remove bolt.
10-84.6 Change 3