TM 5-2330-325-14&P
5-5.
AXLE ALIGNMENT (Continued).
WARNING
Failure to torque fasteners to the specified torque may lead to fastener failure
and consequent loss of vehicle control.
(5) Repeat Steps (1) through (4) to align the next rearward axle. Follow the same procedure of
loosening the torque rod pinch bolts, rotating the tube until dimensions "Y" and "Y1"
between the axle just aligned and the next rearward axle are equal, and then tightening the
clamp bolts to the proper torque.
(6)
After alignment has been accomplished on all axles, all torque clamp bolts should be
rechecked to make sure they are at the proper torque.
FOLLOW-ON TASKS:
None
5-20
