TM 5-2330-325-14&P
4-53.
AIR BRAKE CHAMBER REPLACEMENT(Continued).
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If solvent gets on skin or clothing, wash immeditaly with soap and
water.
(2)
Remove grease and oil with cleaning compound using a soft cloth. Dry thoroughly.
d.
Inspection.
(1)
Inspect for loose, missing or damaged parts.
(2)
Inspect air chamber for cracks, dents, holes and warps.
(3)
Inspect for rust or corrosion.
e.
Installation.
WARNING
If installing a new brake air chamber, make sure it is caged prior to installation.
Failure to do so could result in serious injury to personnel or damage to equipment.
(1)
Position air chamber (7) onto axle and secure with two nuts (3) and new lock washers (2).
(2)
Apply anti-seize tape to two air lines (1) and connect air lines.
(3)
Close all drain valves and pressurize air brake system.
(4)
Check for leaks.
FOLLOW-ON TASKS:
Adjust slack adjuster (para. 4-48).
Uncage brakes (para. 2-19).
4-71
