TM 5-2330-325-14&P
3-8.
TIRE ASSEMBLY REPLACEMENT (Continued).
(4)
Using handle and wrench, remove ten lug nuts (3).
(5)
With the aid of an assistant, remove the outer tire assembly (4).
NOTE
If removing only the outer tire assembly, do not perform Step (6).
(6)
With the aid of an assistant, remove the inner tire assembly.
(7)
Remove valve stem extension.
CAUTION
If the valve stem extension is not removed prior to mounting the spare tire to the
stowage area, it will break off the entire valve due to its extended length.
b.
Installation.
NOTE
If only the outer tire assembly is being installed, go to Step (3).
(1)
Install valve stem extension.
(2)
With the aid of an assistant, install inner tire assembly.
(3)
With the aid of an assistant, install outer tire assembly (4). Be sure that the valve stem (5),
is opposite (180) from the inner valve stem (6).
Tire Assembly Installed Correctly
(4)
Using handle and wrench, install 10 lug nuts and tighten.
NOTE
not available, tighten the lug nuts with a wrench handle, pushing down
with full body weight. Check for proper torque at earliest availability.
3-12
