TM 5-2330-325-13&P
FIELD MAINTENANCE
FLOOR BOARD ASSEMBLY REPAIR
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's
Two
(WP 0144, Table 1, Item 16)
Drill, Electric, Portable
Equipment Condition
(WP 0144, Table 1, Item 5)
Semitrailer parked on level ground (WP 0005)
Drill Set, Twist (WP 0144, Table 1, Item 4)
REMOVAL
1.
From under semitrailer, remove nut (Figure 1, Item 4), and clip (Figure 1, Item 3) from screw
(Figure 1, Item 1).
2.
Drive out screw (Figure 1, Item 1) from board (Figure 1, Item 2).
3.
Repeat Steps 1 and 2 for other nuts, clips, and screws in boards.
4.
Remove old board (Figure 1, Item 2) from deck (Figure 1, Item 5).
1
2
5
3
4
466-0089
Figure 1.
Floor Board Removal.
END OF TASK