M1070 HET ARMOR KIT
II113400
Rev. D
2. Install right side panel assembly as follows (see Figure 3-49):
NOTE
Repositioning of 90-degree joiner bracket may be required to provide adequate
clearance while mounting the right side panel assembly.
a. Using appropriate lifting device, hardware, and personnel, lift right side panel assembly into position onto
cab and secure with twelve bolts (1). Torque bolts to 18 lb-ft.
b. Slide 90-degree joiner bracket firmly into position against cab frame rail and torque bracket locknuts to
23 lb-ft.
INSTALLATION 3-92
JUNE 2005