TB 9-2320-360-13&P-2
MUFFLER BRACKETS REPLACEMENT - CONTINUED
0038 00
REMOVAL
1.
Using lifting device, support muffler.
2.
Remove two nuts (2) and rear muffler clamp (3) from exhaust pipe.
3.
Remove two bolts (17), washers (18), rear muffler bracket (1), and support bracket (19) from vehicle.
4.
Remove four nuts (14), washers (15), bolts (4), washers (5), and two muffler bracket mounts (16) from vehicle.
5.
Remove two nuts (7) and front muffler clamp (6) from exhaust pipe.
6.
Remove four nuts (11), two washers (12), bolts (8), washers (9), four springs (10), and front muffler bracket (13) from
vehicle.
3
4,5
2
6
7
1
8,9
10
19
11,12
417-219
17,18
16
13
14,15
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install two washers (9), bolts (8), front muffler bracket (13), four springs (10), two washers (12), and four nuts (11) on
vehicle.
2.
Install front muffler clamp (6) and two nuts (7) on exhaust pipe and front muffler clamp (13).
3.
Install two muffler bracket mounts (16), four washers (5), bolts (4), washers (15), and nuts (14) on vehicle.
4.
Install rear muffler bracket (1), support bracket (19), two washers (18), and bolts (17) on muffler bracket mounts (16).
5.
Install rear muffler clamp (3) and two nuts (2) on exhaust pipe and rear muffler bracket (1).
6.
Remove lifting device from muffler.
7.
Install muffler shields (TM 9-2320-360-20).
END OF WORK PACKAGE
0038 00-2