TB 9-2320-360-13&P-2
SPRING STOP REPLACEMENT - CONTINUED
0037 00
REMOVAL - CONTINUED
3.
Remove nut (2), lockwasher (1), bolt (7), and spring stop (6) from spring stop bracket (5). Discard lockwasher.
4.
Remove two locknuts (3), bolts (4), and spring stop bracket (5) from vehicle chassis. Discard locknuts.
3
4
1
2
5
6
7
417-218
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install spring stop bracket (5), two bolts (4), and new locknuts (3) on vehicle chassis. Torque locknuts to
220 lb-ft (298 Nm).
2.
Install spring stop (6), bolt (7), new lockwasher (1), and nut (2) on spring stop bracket (5). Torque nut to
110 lb-ft (149 Nm).
3.
Lower vehicle to ground (TM 9-2320-360-20).
END OF WORK PACKAGE
0037 00-2
