TB 9-2320-360-13&P-2
RIGHT CAB SIDE (FRONT) ARMOR AND DOOR HINGE MAINTENANCE - CONTINUED
0026 00
INSTALLATION
1.
Use sealing compound to attach four spacers (12) to side of cab.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Side armor assembly weighs 80 lb (36 kg).
Make sure spacers are aligned with four bolt holes.
2.
With assistance, install cab side armor assembly (13), four washers (3), new lockwashers (2), bolts (1), and bracket (11)
on firewall (10). Tighten bolts to 23 lb-ft (31 Nm).
3.
Install two sleeve bushings (7), washers (6), bolts (5), washers (9), and new locknuts (8) on cab side armor assembly
(13). Tighten locknuts to 35 lb-ft (48 Nm).
4.
Install 12 bolts (4) on cab side armor assembly (13). Tighten bolts to 18 lb-ft (24 Nm).
5.
Align bolt holes in bracket (31) and tighten two locknuts (30) to 35 lb-ft (48 Nm).
4
1,2,3
10
31
5,6,7
11
30
13
12
8,9
417-105
6.
Install door assembly (WP 0015 00).
7.
Install right firewall armor (WP 0021 00).
8.
Install right step (WP 0033 00).
9.
Install right blast deflector (WP 0031 00).
END OF WORK PACKAGE
0026 00-5/(0026 00-6 Blank)