TB 9-2320-360-13&P-2
ROOF ARMOR REPLACEMENT - CONTINUED
0024 00
REMOVAL
NOTE
Vehicle shown below has two long brackets (3). Some vehicles have four shorter brackets.
Note location of washers for correct installation.
1.
Remove 32 locknuts (1), washers (2), and two brackets (3) from the left and right edge of roof armor (7). Discard lock-
nuts.
2.
Remove 48 washers (2) from studs on left and right side of roof armor (7).
3.
Remove 24 locknuts (5), washers (6), and three brackets (4) from the rear of roof armor (7). Discard locknuts.
NOTE
Reinstall one locknut on each stud plate. This will keep the stud plates attached to roof armor during removal.
5,6
7
4
3
1,2
417-102
4.
Remove 12 locknuts (10) and washers (11) from center of roof armor (7). Discard locknuts.
5.
Remove six locknuts (8) and washers (9) from front edge of roof armor (7). Discard locknuts.
6.
Attach sling and lifting device to four lifting eyes (12) on roof armor (7).
0024 00-2