TB 9-2320-360-13&P-1
STOWAGE BOX REPLACEMENT - CONTINUED
0039 00
REMOVAL
1.
Remove two screws (1) and locknuts (2) from two winch brackets (3) and support bracket (4). Discard locknuts.
2.
Remove two screws (5) and locknuts (6) from two winch brackets (3) and winch. Discard locknuts.
3.
Remove three screws (7) and locknuts (8) from support bracket (4) and stowage box (9). Discard locknuts.
4.
Remove three screws (10) and locknuts (11) from floor. Discard locknuts.
N OT E
In the following step, use lockwashers if locknuts are not provided in A/C kit.
5.
Remove screw (12) and locknut (13) from bottom ladder extension (14). Discard locknut.
6.
Using suitable lifting device, remove stowage box (9).
7.
Remove screw (15) and locknut (16) from top ladder extension (17). Discard locknut.
8.
Remove screw (18) and lockwasher (19) from bottom ladder extension (14). Discard lockwasher.
9.
Remove screw (20) and locknut (21) from top ladder extension (17). Discard locknut.
10.
Remove screw (22) and locknut (23) from bottom ladder extension (14). Discard locknut.
HETF00525
INSTALLATION
1.
Install screw (18) and new lockwasher (19) into bottom ladder extension (14).
2.
Install screw (15) and new locknut (16) into top ladder extension (17).
3.
Install screw (22) and new locknut (23) into bottom ladder extension (14).
4.
Install screw (20) and new locknut (21) into top ladder extension (17).
5.
Use a suitable lifting device to place stowage box (9) in position.
0039 00-2
