TB 9-2320-360-13&P-1
A/C COMPRESSOR BELT ADJUSTMENT/REPLACEMENT - CONTINUED
0037 00
REMOVAL
N OT E
Radiator and fan shown removed for clarity.
1.
Loosen screw (1) and locknut (2) on top of compressor (3).
2.
Loosen two locknuts (4) and screws (5) to pivot compressor (3) toward engine (6).
3.
Remove belt (7) from compressor pulley (8) and engine pulley (9).
HETF00459
INSTALLATION
1.
Position belt (7) on compressor pulley (8) and engine pulley (9).
2.
Pivot compressor (3) away from engine (6).
ADJUSTMENT
N OT E
New compressor belt will be tightened to 98 lb (436 N).
Used compressor belt will be tightened to 85 lb (378 N).
1.
Position belt tension gage on belt (7) midway between compressor pulley (8) and engine pulley (9).
2.
Adjust tension on belt, and tighten screw (1) and locknut (2).
3.
Tighten two locknuts (4) and screws (5) under compressor (3).
4.
Remove belt tension gage from belt (7).
5.
Install alternator belts (TM 9-2320-360-20-2).
6.
Close hood (TM 9-2320-360-10).
7.
Remove wheel chocks (TM 9-2320-360-10).
END OF WORK PACKAGE
0037 00-2