TB 9-2320-335-13&P
24-9. RIGHT ENGINE MOUNT BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-24P
automotive (Appendix B, Item 1)
Equipment Condition
Maintenance and repair shop equipment:
Engine right mount and insulator removed
automotive (Appendix B, Item 2)
Materials/Parts
Maintenance Level
Five locknuts (Serial numbers 299999 and
Direct support
below) (Appendix A, Item 85)
Five locknuts (Serial numbers 300000 and
above) (Appendix A, Item 114.4)
NOTE
Tag engine mounts for installation. The left and right engine
mounts are not interchangeable with each other.
a. Removal
1.
Remove two locknuts (10), washers (1), capscrews (2), and washers (1) from support bracket (8) and
engine mount bracket (5). discard locknuts (10).
2.
Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5).
3.
Remove three locknuts (9), washers (7), capscrews (6), washers (7), support bracket (8), and engine
mount bracket (5) from frame rail (11). Discard locknuts (9).
b. Installation
1.
Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (7),
capscrews (6), washers (7), and locknuts (9).
2.
Secure support bracket (8) on engine mount bracket (5) with two washers (1), capscrews (2),
washers (1), and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-ft (122 Nm).
3.
Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3).
24-8