TB 9-2320-335-13&P
15-6. CRANKSHAFT PULLEY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Hood raised and secured (TM 9-2320-387-10).
automotive (Appendix B, Item 1)
Geared fan drive shaft removed (para. 3-80.3).
Materials/Parts
Maintenance Level
Sealing compound (Appendix C, Item 69)
Direct support
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
a. Removal
1.
Remove serpentine belt (para. 3-81.2).
2.
Remove four capscrews (5), mudshield (1), crankshaft pulley (2), and spacer (4) from torsional
damper (3).
b. Installation
1.
Apply sealing compound to four capscrews (5).
2.
Install spacer (4), crankshaft pulley (2), and mudshield (1) on torsional damper (3) with four
capscrews (5). Tighten capscrews (5) to 48 lb-ft (65 Nm).
3.
Install serpentine belt (para. 3-81.2).
FOLLOW-ON TASK:
Install geared fan drive shaft (para. 3-80.3).
Lower and secure hood (TM 9-2320-387-10).
15-14/(15-15 blank)
