TB 9-2320-335-13&P
7-11.1. BRAKE PROTECTION GUARDS REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
b. Installation
NOTE
Perform steps 1 through 6 for front brake protection guards
installation only.
1.
Install bracket (21) on front crossmember (25) with washer (16), lockwasher (17), and capscrew (18).
2.
Install bracket (28) on rear crossmember (1) with washer (27), capscrew (26), washer (29), and
locknut (30).
3.
Install bracket (7) on front crossmember (25) with two washers (8), lockwashers (9), and capscrews (10).
4.
Install bracket (4) on rear crossmember (1) with two washers (5), capscrews (6), washers (3), and
locknuts (2).
5.
Install two right front brake guards (13) on brackets (7) and (4) with four washers (14),
capscrews (15), washers (12), and locknuts (11).
6.
Install left front brake guard (24) on brackets (28) and (21) with two washers (22), capscrews (23),
washers (20), and locknuts (19).
NOTE
Perform steps 7 and 8 for rear brake protection guards
installation only.
7.
Install four brackets (40) on crossmembers (34) and (33) with washers (39), capscrews (38), washers (41),
and locknuts (42).
8.
Install four brake protection guards (37) on brackets (40) with eight washers (35), capscrews (36),
washers (32), and locknuts (31).
7-28